|
Dataproducts 60391 InkStation Multi-Brand Refilling Kit with Cap Remover (Color) | 
 enlarge | Brand: Hitachi
Category: CE
Department: Office
List Price: $29.99
Buy New: $5.77
You Save: $24.22 (81%)
New (13) from $5.77
Rating:  7 reviews
Media: Electronics
Number Of Items: 1
Shipping Weight (lbs): 0.6
Dimensions (in): 4.5 x 1.9 x 8.5
Legal Disclaimer: Warranty does not cover misuse of product.
MPN: 60391
Model: 60391
UPC: 032929603918
EAN: 0032929603918
ASIN: B0000Y8JTK
Release Date: November 5, 2003
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Compatible with most inkjet printers | | • | 84 ml of ink | | • | Yields up to 8 refills | | • | 3 colors of ink (cyan, magenta, and yellow) | | • | Refill tools included |
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
DPS60391 Produces professional color text and images. Reliable and dependable so that you can count on it when you need it most. Simple to use and install. Global Product Type: Inks & Toners; Supply Type: Inkjet Cartridge; Color(s): Color; Device Types: Multifunction Inkjet Printer.PRODUCT DETAILS: -OEM/Compatible: Compatible. -Post-Consumer Recycled Content Percent : 0 pct. -Yield Type: Standard-Yield. -Pre-Consumer Recycled Content Percent : 0 pct. -Supply Type: Inkjet Cartridge. -Replacement For: 0955A003, 6882A003AA. -Global Product Type: Inks & Toners-Inkjet Cartridge. -Coverage Percent : 15.00 pct. -Page-Yield : 105. -Color(s): Color. -Device Types: Multifunction Inkjet Printer. -Remanufactured: No. -Total Recycled Content Percent : 0 pct. Warranty: Manufacturer's limited one-year warranty.
Amazon.com Product Description
Save yourself both money and hassle with this refill kit from Dataproducts. Designed to work with most popular inkjet printers, this three-color (cyan, magenta, and yellow) refill kit contains 84 ml of ink and yields up to eight refills, depending upon your printer. All the tools you need to refill your existing cartridge are included, as is a booklet of refill instructions to help you with your specific printer model. Dataproducts affirms that the specially formulated dye-based ink will not void your printer's warranty and is designed to provide bold, clean prints.
|
| Customer Reviews:
Showing reviews 1-5 of 7
 Inkjet Refill Kit for Canon Pixma ip3000, Canon BCI-3e May 15, 2010
Michael J. Schmidt (Columbus, Ohio)
1 out of 1 found this review helpful
I purchased the Dataproducts Inkjet Refill Kit on the advice of Consumer Reports. (This is for my old Canon Pixma ip3000 printer, using the Canon BCI-3e inkjet cartridges.) Dataproducts' kit was the only one that CR claims is easy to use, doesn't leak ink, etc. After reading the instructions I found that I was unable to depress the valve where I was supposed to insert the refill needle. I contacted customer support and they immediately answered the phone; they emailed me some further and more specific instructions for my particular cartridge. Still no luck. I phoned again and they suggested I return the kit for a refund. Since shipping was a substantial fraction of the total cost, I decided to try my luck with some more serious DIY ideas. I had picked up the idea of using a glowing hot paper clip to poke a hole in the cartridge & to fill it that way. I poked this hole on the part of the cartridge that is the hollow chamber that holds the ink (NOT the side that is filled with cotton), on the side that faces up when the cartridge is installed in the printer, under the label which I had peeled up. On one cartridge I used tape to seal the port that lets the ink out (the hole about the size of a pencil eraser that faces down when the cartridge is installed.) In another I used the original orange plastic cap that I had saved. Then I filled the empty part of the cartridge till it was about 80% full and I took my time, taking 2 - 3 minutes to fill it. I then sealed the little paper clip hole with a drop of glue from my hot glue gun. I let it set in my stainless steel kitchen sink for about 20 minutes to allow it to finish dripping and to allow the pressure within the chambers to equalize. (Both cartridges leaked regardless of how I had sealed the port.) Voila! both printed perfectly.
This will save me a lot of money and I'm happy I bought it. However I wound up using none of the tools that were included in this kit, only the accordian shaped plastic ink bottles with the attached hypodermic needles. If you could buy these elsewhere without the tools you'd save a couple of dollars. Also be forewarned that these cartridges leaked like crazy during refill (though not in the printer). So make sure you do this job in an area where you don't mind a mess or can easily clean it up. Also be sure to take your time putting the ink into the cartridge and give it 20 or more minutes to rest before using it. With that in mind, you can save a lot of bucks and get great looking prints on the Canon Pixma ip3000 if you don't mind a bit of a hassle.
 Never run out of ink again April 1, 2010
TNT73
this is fast easy , never run out of ink again great product great price will buy again in the future , will recommend
Messy, but good March 24, 2010
Joe User (Hartford, CT)
I thought I could drill and fill without ink everywhere. No such luck. After the first fill, I have a hole in the cartridge, so smooth sailing. Lots of ink for low price.
Easy to use! January 16, 2010
T. Tillson
3 out of 3 found this review helpful
I've used plenty of ink refill kits and this one, with the needles attached to the bottle, is the ONLY kind to use, imho. Look for instructions for your specific cartridge online with a google search, then go for it. I've never had any problems with our printer using refill ink.
Good value and quality August 5, 2009
Luis Ventura
4 out of 4 found this review helpful
First time refilling my own ink cartridge. The product was in perfect condition and well packed. Actually, it's a lot of ink and will probably last a long time. I used this kit to refill a HP22 ink cartridge.
Showing reviews 1-5 of 7
|
|
|
Powered by Associate-O-Matic
| |
